Assignment Of The Terminals - Lenze PROFIBUS PT E82ZAFPC010 Instructions De Montage

Assignment of the terminals

Terminal Designation
X3.1/
PES

A T/R(A)
B T/R(B)
Terminal Designation
X3.2/
59
7 GND1
Terminal Designation
X3.3/
7 GND1
39 GND2
28 CINH
20
EDK82ZAFPC-010 DE/EN/FR 6.0
Function / level
Additional HF shield termination
RS485 data line A
RS485 data line B
Function / level
External DC voltage supply for the function module
±
+24 V DC 10% (reference: GND1)
Current consumption on 24 V DC: 80 mA
The current for looping through the supply voltage to other nodes
via terminal 59 must be max. 3 A.
Reference potential for X3.3/20
Function / level
Reference potential for X3.3/20
Reference potential for controller inhibit (CINH) at X3.3/28
Controller inhibit
Input resistance: 3.3 k
Start = HIGH (+12 ... +30 V)
Stop = LOW (0 ... +3 V)
(reference: GND2)
DC voltage source for external supply of controller inhibit (CINH)
+20 V (reference: GND1)
I = 10 mA
max

Electrical installation
Assignment of the terminals
Ω
6
61