Petsafe Drinkwell Big-Dog Pet Fountain Manuel D'utilisation page 6

OPERATING INSTRUCTIONS
6) Before you plug the fountain in, make sure the cord and your
hands are dry. Plug the fountain into an electrical outlet.
7) Fill reservoir with water.
8) Check the lid to make sure the black O-ring is in place, then
screw the lid onto the reservoir.
9) Hold the container over the reservoir base of the fountain.
Quickly turn the reservoir upside down and place the lid's
spout into the reservoir base. (See Fig. 3)
Fig. 3
10) Set your desired flow rate with the flow control knob, which is
next to the ramp inside the bowl. When the knob is in the 10
o'clock position, flow is at its lowest. When the knob is in the 2
o'clock position, flow is at its highest. (See Fig. 4)
11) Add water to the bowl as needed. Do not let the water level
fall below the flow control knob or you may burn out the motor.
Never pick up a full fountain by the filter housing. Only pick up
the fountain by placing both hands underneath the base of the
fountain and grip the sidewalls for a sturdy hold.
6
www.petsafe.net
Fig. 4
Flow Control
Knob