Locinox FREE VINCI LFKQ X1L Mode D'emploi page 9

8. Mounting the handles
NOTE! The handle at the top position is the code entrance handle of the gate. The bottom position
is for the free exit handle on the "safe" side of the gate.
CAUTION! Install the handle shaft so that the handle's set screw tightens into the spreader side
of the shaft.
9. Turn the rollerbolt to match the closing direction
CAUTION! Before mounting the Free Vinci to the gate, control if the rollerbolt is in the correct
position. If not, remove the screws and turn the rollerbolt.
NOTE! We recommend to use a threadlocker for the rollerbolt mounting screws. Tighten the
screws securly.
180°
9