Locinox FREE VINCI LFKQ X1L Mode D'emploi page 7

Step 2: Switch the code mechanism to the other side
Slide out the code panel. Loosen the code mechanism screw and flip the code mechanism to the
other side.
Step 3: Remount the code panel
Tighten the code mechanism screw. Change the personal code following the instructions in Chap-
ter 7, Code setting. When the numeric plate is in the correct position, you are ready to replace
the code panel. CAUTION! The reset button always needs to be on the latch bolt side of the lock.
Step 4: Reinstall the covers
After inserting the code panel, insert the Dust and Rain Cover so the lid opens over the code panel.
Slide the Closing Cover into position and tighten the screw. CAUTION! We recommend you to test
the lock (see chapter 10 Operation) before mounting the lock.
7