Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7. Code setting
Because of safety reasons, the Free Vinci is developed in such a manner that the code
can only be changed when it is not mounted. The default setting of the code is 1-2-3-4.
The steps below explain how you can modify your own personal code in a fast and simple manner.
The Free Vinci enables the setting of a 4 to 6-digit code.
Step 1: Remove the code panel.
After removing the code panel, you will find the red and green code screws. When dealing with
a new lock, the green screws are set in position 1-2-3-4, as shown. Remove all code screws from
the code mechanism with the enclosed Allen key.
Step 2: Set your personal code
Insert the green code screws in the position you want your personal code to be. Fill the remaining
holes with the red screws. All holes must be filled with a screw. Tighten the screws down so they
are firmly seated.
8
Publicité
Table des Matières
