Code Setting - Locinox FREE VINCI LFKQ X1L Mode D'emploi

7. Code setting

Because of security reasons, the Free Vinci is developed in such a manner that the code
can only be changed when it is not mounted. The default setting of the code is 1-2-3-4.
The steps below explain how you can modify your own personal code in a fast and simple manner.
The Free Vinci enables the setting of a 4 to 6-digit code.
Step 1: Remove the closing cover and code panel.
After removing the code panel, you will find the red (stop) and green (go) code screws. From the
factory, the green screws are automatically set in position 1-2-3-4, as shown. Remove all code
screws from the code mechanism with the enclosed Allen key.
Step 2: Set your personal code
Insert the green code screws in the position you want your personal code to be. Fill the remaining
holes with the red screws. All holes must be filled with a screw. Tighten the screws down so they
are firmly seated.
36