Etac Turner PRO Mode D'emploi page 7

Transport and storage
Turner PRO can be stored and transported under temperatures
between -25 - 70 °C and relative humidity between 15 - 93 %
Don`t use the Turner Pro for transportation
of people or goods.
Transfering user
1
Grip the handle with both
hands and place one foot on
the foot rest. The user grips the
handle, if possible with both
hands.
3
Twist the Turner PRO so that
the user is transferred to the
front of the new seat.
2
Encourage the user to stand
up, at the same time, coun-
ter-balancing the users weight
using a foot and hands (use
your bodyweight by leaning
backwards).
4
Step on footrest, brace your
weight and ask the user to sit
down. Maintain eye contact
with the user during the entire
transfer prococess.
User / Assistant
The assistant has to be able to handle the
weight of the user.
Make sure the users weight is within the
baseplate.
Cleaning and disinfection
Clean on a regular basis. Clean surfaces with a damp cloth
using an appropriate pH-neutral detergent. Do not use solvents
or strong liquids, this may damage surfaces on the Turner. For
disinfection when needed; use isopropyl alcohol or similar. Avoid
abrasive cleaning products. Remove hair and pile from the wheels
and verify that the wheels rotates freely.
Make sure not to damage or remove labels
when cleaning.
Reconditioning
Follow cleaning and assembly procedure. Separate reconditioning
document is available at Etac.com.
Recycling
Turner PRO can be disposed of as metal waste. Recycling instruc-
tions is available at Etac.com
Spare parts
A list of spare parts is available at Etac.com.
7
Etac Turner PRO / www.etac.com