Check For Leaks - Kohler Mach Tripoint 10TD00N10-CP Mode D'emploi

5. Check for Leaks

IMPORTANT! Do not open the control stop beyond the flow capacity of the fixture.
The fixture must accommodate continuous flow from the valve in the event of a
failure.
Open the control stop 1/2 turn. The valve may flush.
If flushing is continuous, open the control stop further.
When flushing stops, check for leaks.
For touchless models: Continue to the "Test the Sensor" section.
For manual models: Continue to the "Adjustment" section.
Kohler Co. 9
1339618-2-C