Bulk Editing - Nordson EFD Ultimus V Manuel Utilisateur

Doseur de Fluide Haute Précision Ultimus V
Annexe B — Protocole RS-232 (suite)
Ultimus V Interactive Software (suite)

4.4 Bulk Editing

To send multiple values to the dispenser at once, you must use the Supervisor Mode.
1. Click FILE > SUPERVISOR MODE, or press CTRL + S at the main screen of the Ultimus V Interactive software.
2. Enter the password for Supervisor mode (Default: 0000).
The Supervisor password can be changed at the Ultimus V dispenser front panel keypad. The Ultimus V
dispenser and Ultimus V Interactive software must use the same password for correct operation.
3. After correct entry of the Supervisor password, a new tab called "Dispense Profile" appears. Use this tab to
send multiple values to the dispenser at once.
See the Dispense Profile Graph for Dispense
Time, Dispense Pressure, or Vacuum with
respect to Cumulative Trigger.
80
www.nordsonefd.com/fr EFDEU-South@nordson.com
Enter the settings you want to send to
the dispenser, from Memory cell 0 up
to 399. You can enter settings for the
following parameters:
• Dispense Time
• Dispense Pressure
• Vacuum
• Trigger Value
Click TRANSMIT PROFILE to send all
the settings to the dispenser.
+33 (0) 1 30 82 68 69 Les services et les points de vente des systèmes de dosage Nordson EFD sont présents dans le monde entier.