Auto Increment Mode Command; Set Start & End Address Command - Nordson EFD Ultimus V Manuel Utilisateur

Doseur de Fluide Haute Précision Ultimus V
Annexe B — Protocole RS-232 (suite)

2.6.2.18 Auto Increment Mode Command

This command changes the Auto Increment Mode to either Timer, Counter, or Auto Sequence mode. This command
also updates the lower four digits of the trigger value.
Client command and data: AC--SsDdddd
s: Mode Command. 1 = Timer Mode, 2 = Counter Mode, 4 = Auto Sequence Mode.
dddd: Trigger Value. 0001–9999
EXAMPLE: To set the mode to Timer Mode and the Trigger value to 100, the text packet is:
(STX) + 0B + AC-- + S1D0100 + 41 + (ETX)
Length of this text packet: Decimal 11 or hexadecimal 0B
The above text packet in hexadecimal format:
STX 0
0x02 0x30 0x42
4 1
0x34 0x31 0x03
2.6.2.19 Set Start & End Address Command
This command downloads the auto increment start and end addresses.
Client command and data: SS--SsssEeee
sss:
Start Address 000–399
eee: End Address 000–399
EXAMPLE: To set the Auto Increment Start Address as 1 and the End Address as 50, the text packet is:
(STX) + 0C + SS-- + S001E050 + E9 + (ETX)
Length of this text packet: Decimal 12 or hexadecimal 0C
The above text packet in hexadecimal format:
STX 0
0x02 0x30 0x43
0 E
0x30 0x45 0x39
58
www.nordsonefd.com/fr EFDEU-South@nordson.com
B A C space space
0x41 0x43 0x20
ETX
C S S space space
0x53 0x53 0x20
9 ETX
0x03
+33 (0) 1 30 82 68 69 Les services et les points de vente des systèmes de dosage Nordson EFD sont présents dans le monde entier.
S 1 D
0x20 0x53 0x31 0x44
S 0 0
0x20 0x53 0x30 0x30
0 1 0 0
0x30 0x31 0x30 0x30
1 E 0 5
0x31 0x45 0x30 0x35