Installing And Removing Accessories - Textron Greenlee Utility HW1 Mode D'emploi

Setting the Super Spool™
1. Insert a screwdriver into the spool recess.
Greenlee / A Textron Company
1.800.544.2843
OC CC
www.calcert.com
15
10 20
5 25
0 30
HW1 and HW1V Impact Wrenches

Installing and Removing Accessories

tools.
Inspect accessories before use. Discard accessories
Failure to observe this warning could result in severe
injury or death.
Impact Bits and Screwdriver Bits
style bits.
Do not use bits with a long spiral and center support.
minimum flow.
Failure to observe these warnings could result in
severe injury or death.
Center Support
other contamination.
remove the 1/2" adapter.
away from the tool and remove the bit.
1/2" Socket Drive Adapter and Sockets
other contamination.
from the tool and remove the adapter.
x
Long Spiral
sales@calcert.com