Textron Greenlee Utility HW1 Mode D'emploi page 5

and installing drill bits. Drill bits can cut even when
stationary.
Inspect tool before use. Replace any worn or
personnel.
Inspect the hydraulic hoses and couplings every
manual could result in injury or property damage.
event of a tool malfunction.
Prolonged exposure to vibration or very repetitive hand
Greenlee / A Textron Company
1.800.544.2843
IMPORTANT SAFETY INFORMATION
www.calcert.com
15
10 20
5 25
0 30
HW1 and HW1V Impact Wrenches
Procedure for connecting or disconnecting hydraulic
1. Move the flow lever on the hydraulic power source
to the OFF position.
prevent pressure buildup. In case some pressure
slowly.
1. Release the trigger.
Note: Keep all decals clean and legible, and replace
when necessary.
5
sales@calcert.com