Hoses and Fittings
Installation and Maintenance
Replacement
and Hoses.
the power source is running or if the hydraulic fluid is
hot. Hot hydraulic fluid could cause serious burns.
Typical Setup
Greenlee / A Textron Company
1.800.544.2843
HW1 and HW1V Impact Wrenches
9
www.calcert.com
15
10
20
5
25
0
30
Hose Connections
Tool Port Identification
Pressure Port
P
Connecting Hoses
1. Move the flow lever on the hydraulic power source
to the OFF position.
on the tool.
4.
source.
Disconnecting Hoses
1. Move the flow lever on the hydraulic power source
to the OFF position.
from the hydraulic power source.
5. Install dust caps over the ports to prevent
contamination.
sales@calcert.com
Return Port
T
or