Instructions - AquaScape 91142 Mode D'emploi

Instructions

• Carefully unpack the Pond Powerhead (Ex. 1).
• The Pond Powerhead does not require any pipe or
plumbing, allowing for quick and easy installation in new
or existing water features.
• Set the Pond Powerhead(s) in the desired location(s) in the
pond or water garden (Ex. 2). Good installation locations
include stagnant areas with low water movement or debris
build-up.
• Each time the powerhead turns on it will provide a slight
recoil. Therefore, we recommend setting the unit in a
location where the back of the unit is against a surface
which will prevent the pump from moving.
• If desired, the powerhead can be disguised into the pond
using rocks or other landscape materials (Ex. 3).
NOTE: The powerhead will need to be accessed
occasionally for maintenance. Do not make the unit
inaccessible, allowing for access during maintenance
procedures.
NOTE: When disguising the unit, provide space around
the perimeter of the unit to avoid restriction of water intake.
4
• The integrated adjustable head allows for directional flow
control once it is already in position (Ex. 4). Adjust the
head to focus flow in the desired direction.
Ex. 1
• Multiple units can be easily installed in a single system
(Ex. 5).
Skimmer
12-Volt
Transformer
Ex. 2
• Simply connect low-voltage cables using Aquascape
Garden and Pond 3-Way or 6-Way Splitters (Ex. 6). A
25' Extension Cable and 5-Outlet Extension Cable are
available, making wiring easier than ever with no splicing
required (Ex. 6).
#98489
Ex. 3
#98998
☎ ☎
US (866) 877-6637 |
Pond Powerhead
Pond Powerhead
3-Way
Quick-Connect Splitter
2
B
A
#84022
2
#84023
CAN (866) 766-3426 | aquascapeinc.com
Ex. 4
BioFalls
®
Ex. 5
1
B
A
1
Ex. 6