Editing/Creating Setpoint Temperatures - Ovention Double MiLO2-16 Manuel D'installation Et D'utilisation

English

Editing/Creating Setpoint Temperatures

Use the following procedure to edit or create the setpoint
temperature(s) available at oven startup. This procedure
requires access to password-protected screens and should be
performed by authorized personnel only.
1. From the Categories screen, touch
• A password keypad will appear on the touchscreen.
2. Input the password "12345" , and touch
• The Settings screen will appear on the touchscreen.
Touch desired icon to
view/edit/create
corresponding setting.
Touch to return to
Categories screen.
Settings Screen
3. Touch SET TEMPS on the Settings screen. The Set Temps
screen appears.
• The oven can store up to eight setpoint temperatures.
Touch to select existing
setpoint temperature for
editing.
Touch to create new
setpoint temperature.
Touch to return to
previous screen.
Set Temps Screen
OVMILOM-1022
4. Edit/create the desired setpoint temperature.
.
.
Editing Existing Setpoint
Touch to edit
5. Repeat step 4 to edit/create additional setpoint
6. When setpoint temperature changes are complete, touch
13
To edit an existing setpoint:
a. Touch the desired setpoint to edit. The setpoint will be
highlighted.
b. Touch the name to edit the setpoint name using the
keypad that appears, then touch
screen reappears.
c. Touch the temperature to edit the setpoint temperature
using the keypad that appears, then touch
Temps screen reappears.
To create a new setpoint:
a. Touch the icon. A new temperature setpoint named
"Temp" will appear and remain highlighted.
b. Touch the name to edit the setpoint name using the
keypad that appears, then touch
screen reappears.
c. Touch the temperature to edit the setpoint temperature
using the keypad that appears, then touch
Temps screen reappears.
Touch to edit
setpoint setpoint
name. temperature.
Edit Setpoint Screen
temperatures.
twice to return to the Categories screen.
OPERATION
. The Set Temps
. The Set
. The Set Temps
. The Set
Creating New Setpoint
Touch to delete
highlighted
setpoint.