Seat (All Models); Back (Provence) - Vermeiren Provence Mode D'emploi

E

SEAT (all models)

The seat is attached to the basic frame with clamping fixtures.
Place the seat (1) slightly diagonally with the curved fixture (2) in such a way that this fixture
A
grabs under the back crossbar of the basic frame (3).
Press the seat (1) down at the front so that the clamp (4) engages on the front crossbar of the
B
basic frame (5).
If you would like to remove the seat, proceed in the opposite order.
L
Make sure that no objects or body parts come between the seat and the frame – risk of injury!

BACK (Provence)

The back is secured with a connecting pole that can be removed to transport the chair.
1
A
2
3 5
2
1
4
B 1 = seat
2 = curved fixture
3 = back crossbar
4 = clamp
5 = front crossbar
Loosen the connecting pole at the screws (1)
and/or (2) and the back can then be folded
back for transport.
To reconstruct, tighten the screws (1) and/or
(2) securely by hand.
L
Make sure that the screws are
securely tightened before use.
5
FAUTEUIL REPOS
06/2008