Error Messages - SCHOTT Instruments CT 52 Mode D'emploi

25.5. Error messages

Message
-01 TEMP / LEVEL ALARM
-03 EXCESS TEMPERATURE WARNING
-04 LOW TEMPERATURE WARNING
-05 TEMPERATURE MEASUREMENT ALARM
-07 I 2 C-BUS WRITE ERROR
-07 I 2 C-BUS READ ERROR
-07 I 2 C-BUS READ/WRITE ERROR
-08 INVALID COMMAND
-10 VALUE TOO SMALL
-11 VALUE TOO LARGE
-12 WARNING: VALUE EXCEEDS
TEMPERATURE LIMITS
-13 COMMAND NOT ALLOWED IN CURRENT
OPERATING MODE
Remote control
Description
Safety temperature or low liquid level alarm
High temperature warning
Low temperature warning
Error in measuring system
Internal error
Invalid command
Entered value too small
Entered value too large
Value lies outside the adjusted range for the high and
low temperature warning limits. But value is stored.
Invalid command in current operating mode