Technical Data Of Transparent Thermostat Ct 52 - SCHOTT Instruments CT 52 Mode D'emploi

Translation of the legally binding German version

15. Technical data of Transparent Thermostat CT 52

(Version 1 July 2001)
15.1. Technical data immersion circulator CT 52 E
CE sign:
Country of origin:
Temperature ranges:
Heater capacity:
Pump:
Controller:
Connections:
Data transfer:
Mains power connection:
Technical data of Transparent Thermostat CT 52
according to the Council Directive 89/336/EWG (electromagnetic
compatibility)
generic emission according to standard EN 50 081, part 1
generic immunity according to standard EN 50 082, part 1
according to the Council Directive 73/23/EWG of the (low voltage directive)
last modified by the Council Directive 93/68/EWG
testing basis EN 61 010 part 1.
Germany / Made in Germany
Operating temperature range with additional cooling [°C]: +10 ... +60
Working temperature range according DIN 58 966
(20 °C ambient temperature) [°C]:
with tap water cooling* [°C]:
with flow-through-cooler CK 300 [°C]:
Temperature accuracy [K]:
Temperature drift at changing ambient temperature
between 5 and 40 °C:
with 230 V, [VA]: 2000; on request 115 V, [VA]: 1000
pressure / flow rate max. [hPa / I/min]: 250/10
PID control
mechanical:
1. nozzles 2 x 12 mm dia. for flow-through-cooler (CK 300)
2. nozzles 2 x 8 mm dia. for tap water cooling
electrical:
1. connector: control cable to the flow-through-cooler (CK 300)
2. connector: RS232C interface
Interface: bi-directional serial acc. to EIA RS232C
Data format: selectable
Baudrate: 1200, 2400, 4800 or 9600
Parity: no / odd / even
Length: 7 data-bits
Stop bit: 1
Protocol: CTS/RTS: with or without
230 V~, 50 Hz; on request 115 V~, 60 Hz
+30 ... +60
+20 ... +60
+10 ... +60
±0.02
max.0.002 K/1 °C