Safety Notes - SCHOTT Instruments CT 52 Mode D'emploi

Safety notes

Safety notes
These notes are intended to draw your attention to risks which only
you can recognize and avoid or overcome. They are intended to
enhance your own safety consciousness.
We have set the highest quality standards for ourselves and this
unit during development and production. Every unit meets relevant
safety regulations. The correct unit usage and proper handling
is however solely your responsibility.
The following notes must be observed:
These operating instructions must be carefully studied! It
contains important information on the connection to the local
mains supply, correct unit usage and safe handling.
Check for tranportation damage during unpacking. Get in
contact with supplier and/or carrier for settlement of damage
claims. Do not try to start up a damaged unit before the
damage has been repaired or you have ascertained the effect
of the damage.
Ensure that this manual is always at hand for every unit
operator.
Only use this unit solely for the intended application.
Repairs, alterations or modifications must only be carried out
by specialist personnel Considerable damage can be caused
by improper repairs. The SCHOTT Instruments GmbH service
department is at your disposal for repair work.
Do not operate the unit with wet or oily hands.
Do not expose the unit to spray water or immerse it in water.