Alto POSEIDON 1200 Notice D'utilisation page 38

7.2.3 Checking the oil level
7.2.4 Changing the oil
38
All manuals and user guides at all-guides.com
1
2
3
3
1. Check whether the oil level
is between the minimum and
MAX
maximum levels. Add oil if
necessary (see chapter 9.3
MIN
for type of oil).
1. Before changing the oil,
allow the cleaner to become
warm.
2. Remove the panel by
unscrewing the two screws
on the side.
3. Loosen the hose clamp (A).
4. Remove the hose from the
hose nipple (B).
5. Detach the check pipe (C)
from the holder.
6. Allow the oil to drain into a
suitable container (min. 1 l
capacity) and dispose of oil
in compliance with
regulations.
7. Hang the check pipe (C) in
its holder again.
0,5l
8. Unscrew the hose nipple
(D).
9. Fill pump with fresh oil (see
9.3 for oil type and quantity).
10.Check the oil level (see
7.2.3).
11.Screw in the hose nipple,
attach the hose and secure it
using the hose clamp.
12.Attach the panel.
CAUTION!
Special pump oil is required if
the cleaner is used near food.
Please consult your Alto dealer.