Alto POSEIDON 1200 Notice D'utilisation page 36

6.5 Storing the cleaner
(below 0°C)
I
36
All manuals and user guides at all-guides.com
1. Store the cleaner in a dry
room without danger of frost.
CAUTION!
If the high-pressure cleaner is
stored in a room with
temperatures around or below
0(C, anti-freeze should be
drawn into the pump
beforehand:
1. Remove the water inlet hose
from the cleaner.
2. Remove the spray pipe.
3. Switch on the cleaner with
the main switch in position
M. Switch off the cleaner
after max. 3 minutes.
4. Connect the suction hose to
the water inlet of the cleaner
and place it in a tank
containing anti-freeze.
5. Switch on the cleaner with
the main switch in position
M.
6. Hold the spray gun over the
tank containing anti-freeze
and operate it to start
suction.
7. During suction operate the
spray gun two or three times.
8. Lift the suction hose from the
tank containing anti-freeze
and operate the spray gun to
pump off the remaining anti-
freeze.
9. Switch off the cleaner.
10.To avoid any risks, store the
cleaner temporarily in a
heated room before using it
again.