Alto POSEIDON 1200 Notice D'utilisation page 29

4 Operation and Use
4.1 Connections
4.1.1 Connecting the spray
pipe to the spray gun
4.1.2 Connecting the high-
pressure hose and the
water hose
All manuals and user guides at all-guides.com
A
C
B
☞
☞
3
1
1. Pull the blue quick-release
grip of the spray gun
forwards and lock it by
turning it to the left.
2. Insert the nipple of the spray
pipe into the quick-release
connection and turn the blue
quick-release grip to the
right.
3. Pull the spray pipe (or other
accessory) forwards to
check that it is securely
attached to the spray gun.
NOTE!
Always remove any dirt from the
nipple before connecting the
spray pipe to the spray gun.
1. Connect the high-pressure
hose with the quick-release
connection to the high-
pressure connection.
NOTE!
The maximum permissible
working pressure and
temperature are printed on the
high-pressure hose.
Use max. 50 m hose.
2. Before connecting the water
hose to the cleaner, rinse the
water hose briefly to prevent
sand and other dirt from
entering into the cleaner.
3. Use the quick-release
connection to attach the
water hose to the water
connection.
4. Open the tap.
2
(continued -->)
29