Light turns on in
either position.
Slide motion switch
control to "AUTO". Wait
1 minute to warm up.
Flip remote switch to
"ON". Wait 8 seconds.
Flip remote switch to
"OFF".
Remote
switch turns
light on/
Turn power back on
at circuit breaker.
598-1373-02
Verify power is on at circuit breaker.
1
Slide motion switch control to "ON".
on and off several times.
Yes
off.
No
Flip remote switch
Light does
not turn on.
Turn the power
off at the circuit
breaker.
Exchange Control's
Red and Black wires.
Return to 1 above.
Control is wired correctly.
Go to next page.
Turn the power off
at the circuit breaker.
Exchange Control's
Black and Brown wires.
Repeat test.
7
Light turns on in
only one position.
Turn the power
off at the circuit
breaker.
Exchange Control's
Red and Brown wires.
Return to 1 above.