Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TEST FOR CORRECT COMMON WIRE CONNECTION
Move one end of the jumper
wire to the previously
unconnected terminal.
Remove the jumpered
switch from the
junction box.
Turn the
power off at the
circuit breaker.
Re-install the switch.
Turn the circuit
breaker back on.
Leaving the jumpered switch in one position,
flip the other 3-way switch on and off.
Lights
turn on
and off.
No
No
Jumper is
Yes
correct. Go
to next page.
Flip the switch with the
jumper wire to the
Flip the unjumpered switch
Lights
Yes
turn on
and off.
4
other position.
on and off.
Jumper is
correct. Go
to next page.
598-1373-02
Publicité
Table des Matières
