Power Sockets - Ingeteam INGEREV FUSION Série Manuel D'installation Et Usage

Unit description

2.4. Power Sockets

CAUTION
The use of adaptors, converters or extenders for charging electric vehicles is not permitted.
These charging stations can be purchased with different connector and hose configurations relative to the client's
needs. They allow simultaneous charging of two vehicles, connecting them to either side of the charging point.
The most common configuration includes a single socket on each side, with it being possible to install a maximum
of two sockets on the right side. In this case, those two sockets cannot be used simultaneously.
The different available connectors are displayed below.
CEE 7/3 Type F
IEC 62196-2 Type 3A
Cable Type 1
ABW2011IQM01_D - Installation and Operation Manual
CEE 7/5 Type E
IEC 62196-2 Type 2
Cable Type 2
Ingeteam
EN
ES
FR
IT
PT
13