About This Manual; Scope Of Application; Recipients; Warnings - Ingeteam INGEREV FUSION Série Manuel D'installation Et Usage

Ingeteam

1. About this manual

The purpose of this manual is to describe the INGEREV electric vehicle charging stations and to provide
appropriate information for their correct reception, installation, start-up, maintenance and operation.
INFO
You can download the latest version of this Manual from the website www.ingeteam.com.

1.1. Scope of application

This manual is valid for the following charging stations:
INGEREV FUSION Street
FS1MW (single phase with manual protections
and wattmeters)
FS1AW (single phase with protections, residual
current device with automatic reset and
wattmeters)
FS3NN (three phase without protections,
without wattmeters)
FS3MW (three phase with manual protections
and wattmeters)
FS3AW (three phase with protections, residual
current device with automatic reset and
wattmeters)

1.2. Recipients

This document is intended for qualified personnel.
The status of qualified personnel referred to in this manual will be, as a minimum, that which meets all the
standards, regulations and laws regarding safety applicable to the tasks of installing and operating this unit.
The responsibility for designating qualified personnel will always fall to the company to which the personnel
belong. It is necessary to decide which workers are suitable or not for carrying out specific work to preserve their
safety at the same time as complying with occupational safety legislation.
These companies are responsible for providing appropriate training in electrical equipment to their personnel and
for familiarizing them with the contents of this manual.

1.3. Warnings

Throughout this manual we include warnings to highlight certain information. Relative to the nature of the text,
there are three types of warnings:
This indicates a hazard to personnel or the inverter.
DANGER
Indicates importance.
CAUTION
Additional information or references to other parts of the document or documents.
INFO
10
INGEREV FUSION Wall
FW1MW (single phase with manual protections
and wattmeters)
FSFW1AW (single phase with protections,
residual current device with automatic reset
and wattmeters)
FW3NN (three phase without protections,
without wattmeters)
FW3MW (three phase with manual protections
and wattmeters)
FW3AW (three phase with protections, residual
current device with automatic reset and
wattmeters)
ABW2011IQM01_D - Installation and Operation Manual
About this manual