Setting A Voice Command For Category; Sms (Short Message Service) - Kenwood KDC-BT742U Mode D'emploi

Select "PB NAME CHK" (Play)
Press the [AUD] knob.
5
Play the registered voice and return to step 2.
Select "PB NAME DEL" (Delete)
5
Delete a voice tag
Press the [AUD] knob at least 1 second.
Return to step 2.
Exit the voice tag mode
Press the [SEARCH] button.
⁄
• Audio sound is not output during voice tag registration.
Setting a Voice Command for
Category
Add a voice tag to the phone number category
(type) for voice calling.
1
Enter voice tag mode
Select "MENU" "VOICE TAG".
>
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Select "PB TYPE EDIT" mode
Press the [AUD] knob to select "PB TYPE EDIT",
and then press the [AUD] knob for at least 1
second.
3
Select the category (type) you wish to set
Turn the [AUD] knob or push it towards up or
down.
"GENERAL"/ "HOME"/ "OFFICE"/ "MOBILE"/ "OTHER"
Press the [AUD] knob.
4
5
Select a mode
Turn the [AUD] knob or push it towards up or
down.
Display
"PB TYPE REG"
"RETURN"
Register the category (type) by performing
6
steps 5 to 7 in <Adding a voice dialing
command> (page 30).
Exit the voice tag mode
Press the [SEARCH] button.
Operation
Register a voice tag.
Return to step 2.
⁄
• Set the voice tag for all the 5 categories. If the voice tag
is not registered for all the categories, the Phonebook
may not be recalled by voice command.

SMS (Short Message Service)

The SMS arrived at the cell-phone is displayed on
the receiver.
A newly arrived message is displayed.
¤
• To prevent car accidents, the driver should not read the
SMS while driving.
When a new message arrives
"SMS RECEIVED" is displayed.
The display disappears with any operations.
Displaying the SMS
1
Enter SMS Inbox mode
Select "MENU" "SMS INBOX".
>
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
<Function Control> (page 6).
A message list appears.
2
Select a message
Turn the [AUD] knob or push it towards up or
down.
• Each pressing of the [38] button for at least 1
second switches between telephone number or
name and message reception date.
3
Display the text
Press the [AUD] knob.
Pressing this button again allows you to select a
message again.
• Message Scroll
Continuously pushing the [AUD] knob towards
right or left scrolls the message.
4
Exit the SMS Inbox mode
Press the [SEARCH] button.
31
|
English