Kenwood KDC-BT742U Mode D'emploi page 9

1
Enter Function Control mode
Press the [SEARCH] button for at least 1 second.
"FUNCTION" is displayed.
2
Select your desired setup item
Operation type Operation
Movement between items Turn the [AUD] knob.
Selection of item Press the [AUD] knob.
Return to previous item Press the [SEARCH] button.
Repeat selection and determination until your
desired setup item is selected.
Example:
In this manual, the above selection is
indicated as
Select "MENU"
3
Make a setting
Press the [AUD] knob or turn the [AUD] knob to
select a setting value, and then press the [AUD]
knob.
• The value of items with
press the [AUD] knob.
• The value of items with
pushing the [AUD] knob towards right or left.
• Some items require you to keep pressing the
[AUD] knob for 1 or 2 seconds so that you can
make a setting. For these items, the time during
which you need to keep pressing the [AUD] knob
is displayed in the Entry column in seconds.
• For the functions accompanied by the
description of the setting procedure and so forth,
the reference page numbers are displayed.
4
Exit Function Control mode
Press the [SEARCH] button for at least 1 second.
MENU
DOT LINE
"DOT LINE".
>
mark can be set by
mark can be set by
9
|
English