Kenwood KDC-BT742U Mode D'emploi page 8

Function Control
Category Item
MENU "ZONE2"
"SUPREME"
**
"AMS CONTROL"
*
"CRSC"
"RECEIVE MODE"
"TAG MEM"
"TAGGING"
"ESN="
"NAME SET"
"SCROLL"
"FAV DELETE"
"AUX"
"CD READ"
"AUDIO PRESET"
*
"DEMO MODE"
*Factory setting
* Function of KDC-BT742U.
* Function of KDC-X493.
* Function of KDC-MP442U.
* iPod play mode cannot be set when <iPodCTRL> is set to
"OFF".
* Refer to <Menu Glossary> (page 38).
Displayed item is depending on currently selected
source or mode. The mark in Condition column
shows the condition to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set while Audio file source of CD/USB/iPod.
: Can be set while Audio file source of CD/USB
(excluding iPod).
: Can be set while CD/ Disc changer source.
: Can be set while Disc changer source.
: Can be set during Tuner source.
: Can be set during FM reception.
: Can be set while accessing AUX source.
: Can be set while HD Radio source.
: Can be set during Satellite radio source.
: Can be set only during playback of the iPod source.
(USB source used when the iPod is connected)
8
|
KDC-BT742U/ KDC-X493/ KDC-MP442U
Setting Entry Setting overview
"REAR"*/ Specifies the destination of AUX input sound when the
"FRONT" Dual Zone function is turned on.
"OFF"/ "ON"* Turns ON/OFF the Supreme function.
Controls the connected LX amplifier.
"OFF"/ "ON"* Switches to Monaural to decrease noise when reception
is poor.
"AUTO"*/ Sets the receive mode of HD Radio.
1 sec.
"DIGITAL"/
"ANALOG"
"00"- "50" Displays the tag memory usage of HD Radio. Up to 50
tags can be registered to this unit.
"0FF"/ "ON"* Turns ON / OFF the tag memory function of HD Radio.
Displays the Electronic Serial Number of satellite radio.
Sets the display when switched to AUX source.
1 sec.
"AUTO"*/ Specifies whether the text is scrolled automatically.
"MANUAL"
Deletes Favorite Preset Memory.
1 sec.
"OFF"/ Sets whether to display AUX during source selection.
"ON1"*/
"ON2"
"1"*/ "2" Sets the CD read mode.
Presets the setting value of the audio control. The preset
1 sec.
value is retained after resetting.
"OFF"/ "ON"* Specifies whether to enable demonstration.
2 sec.
: Can be set for sources other than the standby
source by setting "2 ZONE" of <Audio Setup> (page
21) to "ON".
: Can be set while a cell-phone is connected.
: Refer to the reference page.
— : Can be set during all sources.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• Only the items available to the current source are
displayed.
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.
Condition Page
*
*
— 19
8
*
34
34
—
11
— 4
26
*
*
22
— 19