Other Settings; Tuner Setting - Kenwood KDC-X7100DAB Mode D'emploi

DIGITAL RADIO
Search for an ensemble
1
Press repeatedly to select DIGITAL AUDIO.
2
Press repeatedly to select DB1/DB2/DB3.
3 Press and hold S / T to search for an ensemble.
4 Press S / T to select an ensemble, service or component to
listen.
• To change the searching method for S / T: Press
repeatedly.
: Press S / T: Select an ensemble, service or component.
AUTO1
Press and hold S / T: Automatically search for an
ensemble.
: Press S / T: Search for a preset station.
AUTO2
MANUAL : Press S / T: Select an ensemble, service or component.
Press and hold S / T: Manually search for an ensemble.
• To store a service: Press and hold one of the number buttons (1 to 6).
• To select a stored service: Press one of the number buttons (1 to 6).
Select a service
1
Press to enter Service Search mode.
2 Turn the volume knob or press J / K to select a service, then press
the knob.
To cancel the Service Search mode, press
6
ENGLISH
Select a service by name
1
2
3
4
5
To cancel the Alphabet Search mode, press

Other settings

1
2
3
4
To return to the previous setting item, press

TUNER SETTING

AF SET
TI
again.
Press to enter Service Search mode.
Turn the volume knob quickly to enter Alphabet Search mode.
Turn the volume knob or press S / T to select the character to
be searched for.
Press J / K to go to the previous/next page.
Press the volume knob to start searching.
Turn the volume knob to select a service, then press the knob.
Press the volume knob to enter [FUNCTION].
Turn the volume knob to select an item (see the following table),
then press the knob.
2
Repeat step until the desired item is selected/activated or follow
the instructions stated on the selected item.
Press and hold to exit.
ON:
While listening to DAB: Automatically switch to FM broadcasting the same
program if the DAB signal becomes weak. It will switch back to DAB sound
when the signal becomes strong again.
While listening to FM: Automatically switch to DIGITAL AUDIO source
broadcasting the same program (if available). ;
OFF: Cancels.
ON: Allows the unit to temporarily switch to Traffic Information if available
("TI" lights up). ; OFF: Cancels.
again.
.
Default: XX