Bluetooth Setup; Registering Bluetooth Device; Registering Special Bluetooth Device; Registering Pin Code - Kenwood KDC-BT742U Mode D'emploi

Function of KDC-BT742U

Bluetooth Setup

Registering Bluetooth device

To make your Bluetooth device (cell-phone) usable
with this unit, you need to register it (pairing). You
can register up to five Bluetooth devices to this unit.
When registering from Bluetooth devices
Turn on the control unit.
1
2
Start registering a unit by operating the
Bluetooth device
By operating the Bluetooth device, register the
hands-free unit (pairing). Select "KENWOOD BT
CD/R-3P2" from the list of connected units.
3
Enter a PIN code
Input the PIN code registered as mentioned in
<Registering PIN Code> (page 28).
Check that registration is complete on the
Bluetooth device.
By operating the Bluetooth device, start hands-
4
free connection.
When registering from this unit
1
Enter Bluetooth device registration mode
Select "MENU" "DVC REGIST".
>
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
<Function Control> (page 6).
Search for the Bluetooth device.
When search is completed, "FINISHED" is displayed.
2
Select the Bluetooth device
Turn the [AUD] knob or push it towards up or
down to select the Bluetooth device.
Press the [AUD] knob to determine the
selection.
3
Input the PIN code
Operation type Operation
Select the numbers. Turn the [AUD] knob or push it towards
up or down.
Move to the next digit. Push the [AUD] knob towards right.
Delete the last digit. Push the [AUD] knob towards left.
4
Transmit the PIN code
Press the [AUD] knob for at least 1 second.
If "PAIRING OK" is displayed, registration is
completed.
5
Return to the device list
Press the [AUD] knob.
6
Exit Bluetooth device registration mode
Press the [SEARCH] button.
28
|
KDC-BT742U/ KDC-X493/ KDC-MP442U
⁄
• This unit allows up to eight digits to be input for a PIN
code. If a PIN code cannot be input from this unit, it can
be input from the Bluetooth device.
• If there are 5 or more Bluetooth devices registered, you
cannot register a new Bluetooth device.
• If the error message appears even though the PIN code
is correct, try <Registering Special Bluetooth device>
(page 28).

Registering Special Bluetooth device

Allow registration of a special device that cannot be
registered normally (pairing).
1
Enter special device registration mode
Select "MENU" "S-DVC SELECT".
>
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
<Function Control> (page 6).
A list is displayed.
2
Select a device name
Turn the [AUD] knob or push it towards up or
down to select a device name.
Press the [AUD] knob to determine the
selection.
If "COMPLETE" is displayed, registration is
completed.
Go through the procedure of <Registering
3
Bluetooth device> (page 28) and complete the
registration (pairing).
Cancelling special device registration mode
Press the [SEARCH] button.
⁄
• If the device name is not in the list, select "OTHER
PHONE".

Registering PIN Code

By operating the Bluetooth device, specify the PIN
code necessary for registering this unit.
1
Enter PIN code edit mode
Select "MENU" "PIN EDIT".
>
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
<Function Control> (page 6).
The current setting of PIN code is displayed.