Kärcher K 2.19 Manuel D'utilisation page 6

STEP 1:
Connect the detergent suction tube
to the pressure- washer.
STEP 2:
Connect the high pressure hose to
the unit's high pressure outlet.
STEP 3:
Insert the spray wand of your choice
into the trigger gun. Press in against
the spring tension and twist into
locked position.
STEP 4:
Connect garden hose to unit's water
inlet.
6
English
OPERATING INSTRUCTIONS
STEP 5:
Connect garden hose to the cold wa-
ter source and turn water on com-
pletely.
STEP 6:
Plug the Ground Fault Circuit Inter-
rupter (GFCI) into a working outlet.
– Press "RESET" button.
– Press "TEST" button.
Red indicator on "RESET" button
should appear.
– Press "RESET" button again for use.
WARNING
Do not use if above test fails.
Note: The actual appearance of the GFCI may
be different from this illustration.
STEP 7:
Unlock the Safety lock. Trigger the
gun to eliminate trapped air, wait for
a steady flow of water to emerge
from the spray nozzle.