Bartscher 70 Seire Mode D'emploi page 41

Failure
Green lamp on / red
lamp off
Lightening green
lamp / red lamp off
Green lamp on / red
lamp on
Green lamp on /
Lightening red lamp
Lightening green
lamp / red lamp off
Green lamp on /
Lightening red lamp
Green lamp on / red
lamp on
Lightening green
lamp
x ATTENTION: NEVER open the cooking surface or the induction cooker before having
unplugged it from the electric net.
x DANGER of high tension!
x The cooking surface or the induction cooker must be opened only by qualified and authorized
technicians.
x If it occurs that the cooking surface breaks, turn off the cooking unit and unplug it from the
electric feeding, place it in a suitable place awaiting to be repaired by qualified people.
CARE AND MAINTENANCE OF THE APPLIANCE
Cleaning
ATTENTION! Before doing any cleaning, make sure that the appliance is disconnected from
the electric mains. During cleaning operations, avoid using direct or high pressure sprays of
water on the appliance. Cleaning must be done when the appliance is cold.
Problem
There's no heating
There's no heating
There's no heating
There's no heating
There's no heating
There's a weak heating
There's a weak heating
Heating of small metal objects
on the cooking zone
Possible cause
Make sure to have rotate the
knob clockwise.
Make sure to have placed
correctly the suitable pot
Defect control board
Non suitable pot
Obstructed air ducts
Blocked fan
The safety for cooking
without anything has
switched on, the temperature
is over 220°C
Temperature probe broken
The pot hasn't been
recognized
Pot diameter lower than 160
mm
Very high internal
temperature
Non suitable pot
Temperature to high. The
safety has switched on to
reduce the power.
The temperature on the glass
ceramic is rising up too
quickly
Wrongly set pot recognition
Pag. 40/68
Possible solution
Rotate the knob
Place it correctly
CALL THE
ASSISTANCE
Place the right pot
Check and open the ducts
CALL THE
ASSISTANCE
Attendere raffreddamento
del ventilatore
CALL THE
ASSISTANCE
Posizionare correttamente
la pentola
Place the right pot
Check that the machine
doesn't suck hot air
(higher than 40°)
Replace with a suitable
pot
Check that there's a
suitable pot
Check that the pot isn't
empty, set the power in
relation to the quantity of
food container in the pot.
CALL THE
ASSISTANCE