Technical Features - Bartscher 70 Seire Mode D'emploi

WARNINGS
General
x The appliances have been designed for cooking meals contained in pots, pans, trays or similar
tools suitable for such use.
x Read the instructions carefully before installation, use and maintenance of the appliance.
x Installation must be carried out by qualified personnel following the manufacturer's instructions
in the specific manual.
x The appliance must only be used by trained personnel and only for the intended use.
x In the event of breakdown or malfunctioning, switch off the appliance and call in after sales
assistance only from an authorized centre.
x Use only original spare parts; otherwise no liability is accepted by the manufacturer.
x The appliance must not be washed with high pressure water sprays, neither must the openings or
air fumes on heat inlets/outlets be blocked.
ATTENTION! The manufacturer declines any liability for damage caused by wrong
installation, tampering, making unauthorized changes, improper use, poor maintenance,
installation of non-original spare parts, not observing local norms, incorrect use or not
observing the instructions in this booklet
For the installer
x The functioning of the appliance must be explained and shown to the user. After having ensured
that everything is clear, the instruction booklet must be handed over.
The data plate (fig. 8 – pag.5) with all the information to refer to regarding the appliance, is situated
inside the control panel.
The appliances have been checked in accordance with the European directives below.
73/23/EEC - Low Tension (LVD)
89/336/EEC - Electromagnetic Compatibility (EMC)
98/37/EC - Appliance to the directives
And the particular reference norms.
Declaration of compliance
The manufacturer declares that the appliances of their production are compliant with the above
mentioned EEC directives and requires that installation be done observing the norms in force.

TECHNICAL FEATURES

Pag. 33/68