Publicité
Les langues disponibles
Les langues disponibles
Installation & Loading Instructions - MPG115MD Stax Pro2
Installation & Loading Instructions - MPG115MD Stax Pro2
16
16
. Installation of the safety strap will
. Installation of the safety strap will
cause the kayaks to slightly shift and
cause the kayaks to slightly shift and
loosen the red load straps. Re-tighten
loosen the red load straps. Re-tighten
all four load straps so the kayaks are
all four load straps so the kayaks are
held firm. See image 17.
held firm. See image 17.
18
18
Bow and stern safety tie-downs are required for all Malone rooftop transport(s). Failure to correctly install and use
Always check mounting hardware, load straps and safety tie-down lines for proper
If your kit did not include safety tie-downs, we strongly recommend the use of the
Always check mounting hardware, load straps and safety tie-down lines for proper
and secure attachment before transport. Use of this product for any other
Malone MPG316 Sentry Ratchet Tie-Down System or Malone MPG309 SpeedLine Mini Ratchet Tie-Down
and secure attachment before transport. Use of this product for any other
application other than kayak transport voids warranty.
application other than kayak transport voids warranty.
Always check mounting hardware, load straps and safety tie-down lines for proper and secure attachment before
transport. Use of this product for any other application other tha kayak transport voids warranty.
Visit www.maloneautoracks.com/Replacement-Parts
MALONE
MALONE
safety tie-down lines voids all warranty and liability.
MALONE AUTO RACKS, 81 County Road, Westbrook, Maine 04092
MALONE AUTO RACKS, 81 County Road, Westbrook, Maine 04092
Phone: 207-774-9100 Fax: 207-615-0551
Phone: 207-774-9100 Fax: 207-615-0551
Website: www.maloneautoracks.com Email: technical@maloneautoracks.com
for all of your spare part needs
Website: www.maloneautoracks.com Email: technical@maloneautoracks.com
. Install the blue safety strap around the
. Install the blue safety strap around the
center of both kayaks. This is easiest done
center of both kayaks. This is easiest done
by holding the buckle and throwing the free
by holding the buckle and throwing the free
end over the top of both kayaks. Dress the
end over the top of both kayaks. Dress the
free end back under the kayaks, and, up and
free end back under the kayaks, and, up and
through the buckle. Pull down to tighten.
through the buckle. Pull down to tighten.
See image 16.
See image 16.
17
17
. Install the bow & stern safety tie-downs
. Install the bow & stern safety tie-downs
per the enclosed MPG370 instructions.
per the enclosed MPG370 instructions.
See image 18.
See image 18.
Note: The foam blocks should be stored
Note: The foam blocks should be stored
away and the carriers placed in the down
away and the carriers placed in the down
position when not transporting kayaks.
position when not transporting kayaks.
R
R
TM
TM
Publicité
