Manuels Connexes pour MALONE TradeSport MPG921
Sommaire des Matières pour MALONE TradeSport MPG921
- Page 1 MALONE MPG921 TradeSport TruckRack Roller Model MPG921 Assembly Instructions MALONE...
- Page 2 Thank you for your purchase of a Malone Product. In order to be eligible for the Malone Warranty program, we ask that you contact us online at the link provided below within 30 days of purchase. You can also mail this letter back to the address at the bottom.
-
Page 3: Assembly & Installation
Load Roller (1) Mounting Brackets w/ Hardware (2) 3/16” Installation Wrench PARTS LIST ASSEMBLY & INSTALLATION 1. First, open the hardware bag and remove the 6mm Allen wrench along with 6 pieces of hardware (Allen bolt, washer and T-nut). 2. Pair one Allen bolt, washer and T-nut with a mounting bracket and install as shown. - Page 4 4. Align the T-nut of one prepared mounting bracket to the slot along the top of the load bar and slide it into place. Measure approximately 59” from the end of the load bar and tighten fully. 5. Repeat with the second mounting bracket, leaving approximately 46” between them. Leave loose. 6.
-
Page 5: Disclaimer Of Liability
Subject to the limitations and exclusions described in this warranty, Malone will remedy defects in materials and/or workmanship by repairing or replacing, at its option, a defective product without charge for parts or labor. Malone may elect, at its option, not to repair or replace a defective product but rather issue to the original retail purchaser a refund equal to the purchase price paid for the product, or credit to be used toward the purchase of a replacement Malone product. -
Page 6: Garantie À Vie Limitée
Mexique. Si le produit semble défectueux, l’acheteur original doit contacter le détaillant Malone où il a fait son achat et celui-ci lui fournira des renseignements sur la démarche à suivre. Si l’acheteur original ne réussit pas à contacter le détaillant Malone ou encore si le détaillant est incapable de remédier à...