Xoro HSD 7580 Manuel D'emploi page 73

Connecting to a Dolby Digital / DTS / MPEG ampifier
With this player, you can enjoy powerful Dolby Digital, DTS or MPEG sound. Output the
digital signals from the player´s digital output to a decoder or amplifier with build –in decoder.
1. Connect the adapter cable (one phone jack to one RCA) to the digital audio output
(COAX) of the HSD 7580.
2. Connect the RCA jack into the Coax Input of the amplifier.
3. Set the HSD 7580 into AUX mode.
4. Activates the coaxial input of the amplifier.
Notes:
•
For a compatible decoder or amplifier, 5 Speakers ( front left / right / centre / sur-
round left / right ) and a subwoofer are required to enjoy Dolby Digital / 5.1– Channel
sound.
•
Before connecting, make sure to turn off the power of this DVD player, amplifier and
TV.
•
The adapter cable is not part of the accessories.
CONNECTING
21