Cooper Lighting Solutions SVPD Serie Mode D'emploi page 6

Installation Instruction Supplement - Luminaire with Ambient Integrated Sensor
Cooper Lighting Solutions Integrated Sensor System - SVPD1, SVPD2, SVPD3 series
Capture the benefits of traditional lighting controls, without complicated coverage planning or special wiring using a sensor in
every fixture. Ideal for new construction or retrofit fixtures. With the SVPD series, integrated sensors have automatic occupancy
detection and daylight dimming out of the box, immediately saving energy. The lighting system will turn on automatically, dim
to a preset level, and begin to raise/lower to a default light level. The fixture will also turn off when no one is around.
The integral daylight sensor* reduces the need for special daylight zone planning. Each luminaire will automatically adjust the
light level based on reflected light beneath the sensor.
Occupied daylight light levels and unoccupied light levels can be adjusted using the integrated sensor programming remote
(Catalog Number: ISHH-01). The integrated sensor personal remote (Catalog Number: ISHH-02) provides code compliant
(ASHRAE, IECC, T24) manual raise, lower, ON, OFF control.
How its work
• As the user enters the space controlled by the integral sensor, the lighting turns ON to the default daylight level.
• Lighting will remain at that the daylight level until the space is unoccupied. This will start the occupancy timeout period
(default 20 minutes).
• If the space remains unoccupied for half of the timeout period, the lighting will automatically reduce to the Energy Saver
light level. This adjustable light level is typically half of the occupied daylight level.
• At the end of the timeout period the lighting will go to the unoccupied light level. This adjustable light level uses the OFF
default setting.
• Use the ISHH-01 Programming remote to customize the settings and time values. Refer to the Integrated Sensor
programming guide for more information. Use the ISHH-02 Personal Control remote to temporarily turn the lighting on or
off, or change the light level, all without interrupting the programmed settings.
*Daylight sensing not available on some models.
100
(DO)
Daylight Level
0
Unoccupied Occupied
R em ot e C ont r ol
ISHH-01
Programming/Control
Remote (1)
Notes: Compatible with SVPD series only.
(1)
6
Energy Savings
Opportunities
(ES)
Energy Saver
Light Level
(DU)
Timeout Value
Unoccupied Level
Unoccupied
ISHH-02
Personal Control
Remote (1)
Installation instructions Supplement - Luminaire with Ambient Integrated Sensor
ADF14295 V01 www.cooperlighting.com
For default settings by luminaire series,consult
the integrated sensor (SVPD1,SVPD2, SVPD3).
Specification sheet supplement located at
(DO)
www.cooperlighting.com
Daylight Level
Occupied
Programming Remote Functionally
1. An optional programming remote is
available to change the integrated sensor
default settings.
2. Only one remote is needed to program
multiple luminaires with integrated sensors.
3. Refer to the Integrated Sensor
Remote Programming Guide for detailed
information on the use and programming
of the integrated sensor and
programming remote.
(1)