Operation - auna AV2-CD850BT Mode D'emploi

EN
26

OPERATION

The respective buttons can be found on the front of the amplifier and on the
remote control.
1. Select an audio source by pressing the INPUT button on the unit or on
the remote control. USB, BT, AUX1, AUX2, AUX3 are set one after the
other.
2. Adjust the main volume on the volume control (VOLUME) (VOL +/-).
3. Press the ZONE1, ZONE2, ZONE3 or ZONE4 buttons on the unit or on
the remote control to adjust the volume for the respective zone.
4. Press the BASS +/-, TREB +/- buttons to adjust the bass and treble.
5. With MUTE on, you can mute the audio output.
Playback via USB
1. Press the INPUT button until you switch to USB mode
2. Use the and buttons to jump to a title. Press the
or resume playback.
Note: Supported file formats: MP3, WMA, WAV. Max USB data media
size 32 GB
Pairing with BT
1. Disconnect all BT devices that have been paired with the amplifier.
2. Go to the BT settings of your mobile device and activate BT.
3. Switch on the amplifier and set it to BT mode. The blue lettering "BT"
flashes in the display to indicate that the amplifier is ready for pairing.
4. Start the search for BT devices with your mobile device.
5. Select the unit with the BT name "AUNA10031404" from the search
results.
6. Depending on the menu, select "OK" or "YES" to perform the pairing.
7. If a password entry is required, enter "0000".
Note: To unpair, press the DISCONNECT button on the remote control.
button to pause