auna AV2-CD850BT Mode D'emploi page 24

EN
24
Speaker selection
The speakers should be powerful enough. The impedance of the front
speakers should be 4 Ω - 8 Ω. The impedance of the centre and rear
speakers should also be 4 Ω - 8 Ω for all.
Establishing a connection
Switch the device off immediately and pull the power plug out of the
socket. Do not switch the unit on again until the connection has been
successfully established.
2. Make sure that all plugs are properly inserted into the connectors,
otherwise the speakers may produce noise.
Connecting audio and video devices
1. Connect the audio equipment with an RCA cable.
2. The signal for the right speaker is connected to the input for the right
speaker, the signal for the left speaker to the input for the left speaker.