Before Reading the
Instruction Manual
Make sure to check the following before reading the
user's manual.
Icons that will be used in manual
Icon
Term
This involves a function available
in DVD or DVD-R/DVD-RW
DVD
discs that have been recorded
and finalized in Video Mode.
This involves a function available
RAM
in DVD-RAM.
This involves a function available
RW
in DVD-RW.
This involves a function available
R
in DVD-R.
This involves a function available
CD
in a data CD (CD-R or CD-RW).
This involves a function available
JPEG
in a data picture CD(CD-R or
CD-RW).
This involves a function available
in a data CD(CD-R or CD-RW
MP3
on which MP3 is recorded).
This involves a function available
MPEG4
in a data CD-R/-RW,DVD-R/-RW.
This involves a case where a
Caution
function does not operate or
settings may be cancelled.
This involves tips or instructions
NOTE
on the page that help each
function operate.
One-Touch A function that can be operated
button
by using only one button.
ANYKEY A function that can be operated
button
by using ANYKEY button.
About the use of this Instruction Manual
1) Be sure to be familiar with Safety Instructions before
using this product. (See pages 2~3)
2) If a problem occurs, check the Troubleshooting.
(See pages 91~94)
Copyright
© 2006 Samsung Electronics Co.
All rights reserved; No part or whole of this user's manual
may be reproduced or copied without the prior written
permission of Samsung Electronics Co.
Definition
How to use the DVD
Recorder
Step 1
Select the disc type
This unit can record on the following types of discs.
If you want to repeatedly record on the same disc
or you want to edit the disc after recording, select a
rewritable DVD-RW type disc.
If you want to save recording without any change,
choose a non-rewritable DVD-R.
Step 2
Format the disc to start recording
Unlike a VCR, the recorder automatically starts
formatting when an unused disc is inserted. This is
required for the preparation of disc recording.
Using a DVD-RW
This type of disc can be formatted in either DVD-
Video format (Video mode) or DVD-Video Recording
format (VR mode). For an unused disc, a message
that asks whether to initialize or not is displayed.
You can play a Video mode disc in standard DVD
players. A VR mode disc allows more varied
editing.
Using a DVD-R
Initializing disc is unnecessary and only V mode
Recording is supported.
You can play this type of disc on various DVD
components only when they have been finalized.
You can only use either the VR or Video
s
mode on a DVD-RW, but not both at the
NOTE
same time.
You can change the DVD-RW format to
s
another format by reinitializing.
It should be noted that the disc's data will
be lost when changing formats.
English - 9