VITLAB pipeo Mode D'emploi page 34

All manuals and user guides at all-guides.com
Pipetting speed control
The amount of pressure on the pipetting buttons
provides continuously variable speeds up to the
rate set by the speed controller. Press upper
pipetting button for filling and lower button for
dispensing.
Adjust the volume
Use suitable lint-free tissue to wipe the pipette
tip. Slowly press the lower button and dispense
liquid until the meniscus is adjusted exactly to
the desired volume.
Leak Test
When the meniscus has been set, liquid should
not drip out of the pipette until the valves are
activated.
Should the pipette drip, see chapter ‚Trouble-
shooting' (­ page 36)
28