Getting Started - auna Areal Bar 650 Mode D'emploi

GETTING STARTED

Power supply
1. Power supply: The product can use AC voltage 110-240V/50HZ,as stated
in the operation manual or marked on the unit.
2. Power cable:
When pulling out the power cable, it is better to hold the plug section.
Do not touch the AC power supply plug when your hands are wet, since
it may cause an electric shock.
Do not use AC power cables that are too thin or too long as this may
cause a fire or an electric shock.
3. Insert the end of the power cable into the power outlet., then power on
the system and start operations. While the unit powered on, if the LED
display light on - - means its under a standby mode, A long press to the
POWER button to start a normal playing/operation.
4. When the product is not used for a long time, pull out the AC power
supply plug from the AC power supply outlet.
EN
21