EUROM Sani Wi-Fi 400 Manuel De L'utilisateur page 25

1. Set the ON/OFF switch to the ON position
(Figure 14, pos. 1).
2. The control panel and display (Figure 14, pos.
2) will light up.
3. Press the Plus or Minus button to set the
desired temperature, from 0 °C to 37 °C. The
device starts heating when the set
temperature is higher then the ambient
temperature.
4. The display will first show the set
temperature for 3 seconds followed by the
ambient temperature.
Set the countdown timer
1. Press the Timer button once or multiple times to set the countdown timer, from 00 to 24
in whole hours.
Eurom Smart App
The device can be operated using an app on a smartphone or tablet. The Eurom Smart app
can be used to:
•
switch the device on and off (without anticipation);
•
regulate the temperature;
•
set daily timer settings on and off, on the weekly timer.
1. Open the Eurom Smart App manual with the
QR code (Figure 15) or go to
www.eurom.nl/nl/manuals.
2. Complete the Eurom Smart App manual.
•
When the device is connected with Wi-Fi, the
Wi-Fi symbol appears on the screen.
•
If the Wi-Fi symbol is blinking there is no
connection.
Figure 14
Figure 15
25