EUROM Sani Wi-Fi 400 Manuel De L'utilisateur page 24

Installation
WARNING
Do not put the power plug into the wall socket before the device is correctly
mounted.
Do not use an extension cable; this can cause overheating and fire. If using an
extension cable is unavoidable, make sure it is undamaged and earthed. Use
an extension cable with a minimum power of 800 Watt. Always unwind the
extension cable completely to prevent overheating.
CAUTION
Make sure that the main voltage is the same as indicated on the identification
label of the device. All electrical connections must stay dry under all
circumstances.
1. Make sure the device is correctly mounted.
2. Make sure the ON/OFF switch is in the OFF
position (Figure 13, pos. 2).
3. Place the power plug (Figure 13, pos. 1) into
an earthed wall socket that is easily
accessible. Use an earthed wall socket with a
minimum power of 800 Watt.
Operation
WARNING
Before every use, make sure that:
•
•
•
•
•
CAUTION
When the device is turned on or off, it may emit a sound. This is material
expanding and shrinking during heating and cool-down.
24
you operate the device with dry hands;
the device is clean and dry;
the device is not damaged;
the device is not covered or blocked;
the device is securely mounted.
Figure 13