• When the alarm rings, press the
unit. The alarm stops but the alarm settings remain.
SETTING ADJUSTMENTS
Most settings and adjustments are required to be set when you first use the unit.
Settings adjustment is available after connecting this device to TV set via hDMI cable.
Press the SETUP button to access or exit system setup menu.
Press the
/ ,
TV SySTEM
POWER
RESUME
ScREEN SAVER
hD Resolution
48
/
buttons and press the ENTER button confirm selection
AUTO: For TV that is compatible with both PAL and NTSc.
NTSc: For TV with NTSc color system.
PAL: For TV with PAL color system.
ON: Select this to make last memory function available for DISc.
OFF: Select this to make last memory function invalid.
ON: The screen saver starts up if nothing is played back and no
operations are performed for 4 minutes.
OFF: The screen saver does not start up.
The resolution options include AUTO, 480i/576i, 480p/576p,720p, 1080i,
1080p.
Note: If no display appears on the TV screen due to unsupported
resolution, reconnect any available interlace video output to your
isplay and re-adjust the resolution settings to 480p/576p.
button on the remote control or on the
Owner's manual