Programme Play; Play From Bluetooth Device; Pairing Bluetooth-Enabled Devices - Krüger & Matz KM1908 Mode D'emploi

Programme Play

you can programme up to 20 tracks to play in any desired order. The player must be
in STOP mode only with a Disc inserted.
1. Insert a disc and press the STOP
2. Press the PROG button.
3. Press the number buttons (0-9) or
the desired track number.
4. Press the PROG button to confirm the track number to be stored.
5. Repeat steps 3-4 to select and store all desired tracks.
6. Press the button to start programme play.
7. Press the button twice or open the disc compartment to clear programme.
The display shows "PRG cLR".

PLAy FROM BLUETOOTH DEVICE

Pairing bluetooth-enabled devices

To connect your Bluetooth device to the unit, you need to pair the device to the unit.
Pairing needs to be done only once.
1. Press the
repeatedly to select Bluetooth mode. "NO BT" will show on the display if the unit
is not paired to any Bluetooth device.
2. The system has entered pairing mode.
• press the "PAIR" button on the remote control or press and hold the
on the unit to be searchable. The display will show "PAIR".
3. Turn on the Bluetooth function on your device.
4. Search for other Bluetooth device with your device.
5. Select "KM1908" in the pairing list.
6. Enter default password "0000" if necessary.
7. Start music play on your Bluetooth device, you can use this unit's remote to
control the function to your Bluetooth device.
Note:
• The device will also be disconnected when the device is moved beyond the
operation range.
• If you want to reconnect the device to the unit, place it within the operational range.
• The operational range between this unit and a Bluetooth device is up to 8 meters.
• compatibility with all Bluetooth devices is not guaranteed.
• Any obstacle between this unit and a Bluetooth device can reduce the operational range.
• keep this unit away from any other electronic device that may cause interference
• If a connection exist, press the "PAIR" button on the remote control or press and
hold the button on the unit to re-activate the pairing mode, the connection
will be interrupted.
• If no other Bluetooth device pairs with this player within two minutes, the player
will recover its previous connection.
• When connected to an external device, the display shows "BT".
46
button on the unit or the SOURcE button on the remote control
button when it starts playing.
/ buttons on the remote control to select
Owner's manual
button