Select Modes; Adjusting The Volume; Mute Sound; Presetting Equalizer - Krüger & Matz KM1908 Mode D'emploi

Owner's manual
Press the / , ,
2. Select [ video ] -> [TV SySTEM].
3. Select setting:
• [PAL] - For TV with PAL color system.
• [AUTO] - For TV that is compatible with both PAL and NTSc.
• [NTSc] - For TV with NTSc color system.

SELECT MODES

Press the button on the unit or the SOURcE button on the remote control
repeatedly to select DISc, USB, OPTIcAL, FM, DAB, Bluetooth, AUX, cOAXIAL, ARc,
hDMI 1, hDMI 2 mode. The selected mode will show on the display.

Adjusting the Volume

To increase or decrease the volume, rotate the VOLUME control knob on the unit or
press the VOL+/VOL- buttons on the remote control.

Mute sound

If you wish to turn the sound off, press the
Press the button again or press VOL+/- button to resume normal volume.

Presetting Equalizer

Press the EQ button repeatedly to scroll through the following options:
FLAT > POP > cLASSIc > ROck > jAzz
Changing the Front Panel Darkness
To dim or brighten the display, press the DIMMER button repeatedly on the remote
control to the desired brightness.
PLAy FROM ExTERNAL AUDIO DEVICE
1. Ensure that the unit is connected to the TV or audio device.
2. While in ON mode, press the
on the remote control repeatedly to select the OPTIcAL, cOAXIAL, hDMI ARc,
hDMI 1, hDMI 2 mode.
3. Operate your audio device directly for playback features.
4. Press the VOL +/– buttons to adjust the volume to your desired level.
In the OPTIcAL, cOAXIAL, ARc, hDMI 1, hDMI 2 mode, if there is no sound
output, ensure the audio setting of the input source is set to PcM mode.
buttons and press the ENTER button to confirm selection.
button on the unit or the SOURcE button
button on the remote control.
39