Focal Polyglass 27 V1 Mode D'emploi page 5

5
Recommended power ratings
Polyglass subwoofers are already highly efficient, with improved sensitivity. Therefore, their use
with amplifiers will produce comfortable listening pleasure. However used in a more high-end
system, with more powerful amplification, the audio quality will be greatly improved. It is very
important to check that rated power of the amplifier is suitable to the subwoofers. Otherwise they
may distort, or possible damage could occur. Always consult the owners manual of the principal
source (head unit/amplifier), to ensure the power rating is compatible. A safe guide is to ensure
the maximum power of the amplifier is not greater than the nominal power of the speakers.
Guarantee
All Focal loudspeakers are covered by guarantee drawn up by the official Focal distributor in
your country. Your distributor can provide all details concerning the conditions of guarantee.
Guarantee cover extends at least to that granted by the legal guarantee in force in the country
where the original purchase invoice was issued.
Technical characteristics
27 V1
Cone 20.5cm
Sd 330.06cm
Xmax 6mm
Fs 39.01Hz
Qes 0.510
Qms 3.470
Qts 0.445
Vas
21.43 liters
Res 19.73 Ohms
Mms
118.87g
Bl 12.87N/A
Le
23.20mH
Re 2.9 Ohms
Parameters
Impedance
Max. Power
Nom. Power
Sensitivity (2.83V/1m)
Fitting diameter
Fitting depth
Polyglass Subwoofers Manual
33 V1
26cm
2 530.93cm 2
7.5mm
25.25Hz
0.360
3.440
0.326
91.79 liters
31.92 Ohms
171.36g
15.88N/A
58.48mH
3.34 Ohms
27 V1
4 ohms
500W
250W
90dB
9-3/16" - (233mm)
5-1/8" - (130mm)
40 V1
33,5cm
881.41cm 2
7.5mm
26.84Hz
0.510
4.620
0.459
165.66 liters
29.89 Ohms
231.60g
15.90N/A
38.37mH
3.3 Ohms
33 V1
4 ohms
800W
400W
92dB
11-5/16" - (287mm)
6-1/4" - (158mm)
40 V1
4 ohms
800W
400W
93,5dB
13-5/16" - (351mm)
7-5/16" - (185mm)