Hendi 207208 Mode D'emploi page 5

• Do not use water jet, flush directly with water or steam cleaner as the parts will get wet
and electric shock might be resulted.
• CAUTION! Securely route the power cord if necessary in order to prevent unintentional
pulling or contact with the heating surface.
• Do not wash the appliance with water. Washing can cause leakages and increase the risk
of electric shock.
• Do not clean or store the appliance unless it is completely cooled down.
• No part is dishwasher safe.
• Always remove the plug from the socket when filling or cleaning the deep fryer.
• The electrical installation must satisfy the applicable national and local regulations.
• The Fryer tank and element should be placed in a safe position in your kitchen before
usage due to the hot contents when in use.
Intended use
• This appliance is intended for professional use
and can be operated only by qualified personnel.
• The appliance is designed only for frying appro-
priate food only such as French fries, etc. Any
other use may lead to damage of the appliance
or personal injury.
Grounding installation
This appliance is classified as protection class
I and must be connected to a protective ground.
Grounding reduces the risk of electric shock by
providing an escape wire for the electric current.
Preparations before using for the first time
• Check to make sure the appliance is undamaged.
In case of any damage, contact your supplier im-
mediately and do NOT use the appliance.
• Remove all the packing material and protection
film (if applicable).
• Clean the appliance with luke-warm water and
a soft cloth.
• Place the appliance on a level and steady surface,
unless mentioned otherwise.
Installation
• Place the appliance on a level, stable, clean,
heat-resistant and dry surface with its rubber
feet.
• Carefully install the back support with heating el-
ement on the rear edge of the oil container.
• Operating the appliance for any other purpose
shall be deemed a misuse of the device. The user
shall be solely liable for improper use of the de-
vice.
This appliance is fitted with a power cord that has a
grounding wire and grounded plug. The plug must
be plugged into an outlet that is properly installed
and grounded.
• Make sure there is enough clearance around the
appliance for ventilation purposes.
• Position the appliance in such a way that the plug
is accessible at all times.
• Keep the packaging for storing your appliance
when not in use for an extended period of time.
Note:
1. Make sure that the pin on the back support is in
the correct position & properly mounted.
2. The appliance should be placed in a safe posi-
tion in your kitchen before use due to hot hazard
when in use.
EN
5